Filter
Top Products
94 User’s Manual for InterForm400
®
Design InterForm 400 overlay APF300D
Overlay name: MYDEMO Overlay text: Mydemo
Seqnbr. Type Overlay definition
0017 9 Remap window 28-028 pos 54-070 top 5,060 left 6,000 C
0018 9 Remap window 30-042 pos 08-014 top 5,100 left 2,000 C
0019 9 Remap window 30-042 pos 15-025 top 5,100 left 3,000 C
0020 9 Remap window 30-042 pos 26-039 top 5,100 left 4,000 C
0021 9 Remap window 30-042 pos 40-053 top 5,100 left 5,000 C
0022 9 Remap window 30-042 pos 54-070 top 5,100 left 6,000 C
Seqnbr. Type
17,1 7 Ink
Select ink for the succeeding lines
Pattern 8 blank = unchanged,
0 = 100% white shading,
1-8 = 1-100% shading, ...
F3=Exit F18=DSPSPLF F12=Cancel
We enter 8 for 100% shading (Black), which will ensure that the following sequence lines
will be visible. We press Enter to save our new sequence line 18.
Step 11. Defining the Item Line Bars
We would now like to exploit the Repetition and Pattern options in the overlay element
Frame to make shaded horizontal “bars” to provide a better appearance of the item lines.
We place this definition before the first remapping of an item column. The item column
“Model” now has sequence line 19. We therefore enter sequence line 18,1:
Design InterForm 400 overlay APF300D
Overlay name: MYDEMO Overlay text: Mydemo
Seqnbr. Type Overlay definition
0017 9 Remap window 28-028 pos 54-070 top 5,060 left 6,000 C
0018 7 Ink Foreground = BLACK Background = UNALTERED
0019 9 Remap window 30-042 pos 08-014 top 5,100 left 2,000 C
0020 9 Remap window 30-042 pos 15-025 top 5,100 left 3,000 C
0021 9 Remap window 30-042 pos 26-039 top 5,100 left 4,000 C
0022 9 Remap window 30-042 pos 40-053 top 5,100 left 5,000 C
0023 9 Remap window 30-042 pos 54-070 top 5,100 left 6,000 C
Seqnbr. Type Inch.pel Repetition
18,1 1 Frame Top edge 05,110 Move right _______
Left edge 01,120 Move down __0,080
Right edge 06,116 Extra times __5
Bottom edge 05,150
Thikness in pels 000 NW NE SW SE
Round/Sharp (R S) S Radius __ __ __ __
Fill pattern B F4=List
F3=Exit F18=DSPSPLF F12=Cancel
We want the shaded frames to be 1/6" thick with a distance of 1/6” between.
First we must find out where to place the first frame. We want to place our first frame
behind every second item line starting with item line number two. This means 0,175"
(240x0,175 = 42 pels) lower than the black frame. We see that the black frame (sequence