Filter
Top Products
User’s Manual for InterForm400® 315
This will create an entry in the list above, that InterForm400 will use for remembering NOT
to download this soft font when used on this output queue.
This will also create a spooled file on the specified queue (which should be the one, where
the printer is attached). The spooled file name will be ‘ZEBRAFONT’ and the user data
field of the spooled file will be named the same as the downloaded. This spooled file will
do the actual install of the soft font in the flash memory as well as print a sample of the
soft font.
Delete a soft font from flash memory
If you use option 4=Delete for an installed soft font you will be asked to confirm and to
specify the form type of the spooled file, that will do the delete from the flash memory:
Confirm delete of fonts FNT481D
Press Enter to confirm your choices for (4=Delete).
Press F3 or F12 to return to change your choices.
Opt Outq
4 ZEBRA
-------------------------------------------
| |
| Output queue . . . . ZEBRA |
| QUSRSYS |
| |
| Form type . . . . . *STD______ |
| |
| F3=Exit F12=Cancel |
| |
-------------------------------------------
End
F3=Exit F12=Cancel
The entry of this soft font in the list above will be removed and a spooled file will be
generated on the assigned output queue. This spooled file has the name ‘DLTZEBFONT’
and a user data field containing the flash drive and the soft font that will be deleted.
J TIP J
See description of option ‘19. Initiate ZEBRA flash memory and reload fonts and
images’ if there is not enough space in the flash memory.
14. Substitution ZEBRA internal fonts
The resident fonts of the Zebra printers only support Western codepages. However in
order to be able to print other codepages (and use the internal fonts when possible)
InterForm400 provides with the option to specify to substitute the resident font with a
previously installed soft font for each code page: