Intermate iSeries Stepper Machine User Manual


 
260 User’s Manual for InterForm400
®
Overlay + spool entry: This is the reference to the overlay used with a spool entry
which is being included in the report. Spool entries included
in the report will each require a sequence line of this type.
1=Empty Overlay (front page)
Seqnbr. Type Description
1,0 1 Empty overlay
Overlay name.....................: __________ Name, F4=list
Index text.......................:
Front page for monthly report_____________________
Include in index.................: _ (Y N)
Reset page numbering.............: _ (Y N)
Drawer...........................: ________ (*OVERLAY 1 2 3 4 6)
F4 = Prompt
Overlay name: The overlay used for cover page to the
report. This overlay should only consist of
text constants.
Index text: A text for recognition of the front page in the index
(optional)
Include in Index: Y Includes the above text in the index
Reset numbering: Reset continuous numbering. This is of no importance
unless you have cover pages for other sections in the same
report where you want the numbering to be reset.
Drawer: A specific drawer the paper for the cover page should be
taken from. Default is *OVERLAY (specified in the global
settings of the overlay)
2= Overlay with index
Seqnbr. Type Description
2,0 2 Index Overlay name __________ Name, F4=list
From upper edge ______
Indention, text ______
Indention, page no. ______
Rotation ___
Font, text ____ F4=prompt
Font, page no. ____ F4=Prompt
Line spacing ______
F4 = Prompt Overflow limit ______
Drawer ________ (*OVERLAY 1 2 3 4 6)
Overlay name: The overlay used for the index page to the
report. This overlay should only consist of
text constants. (one of the text constants is
likely to be “Table of Contents”).
From upper edge: The vertical start position of the first index line in Inches,
pels absolute to the upper edge of the page according to
the rotation specified below
Indention, text: The horizontal start position of the index lines in Inches,
pels absolute to the left edge of the page according the
rotation specified below.