Filter
Top Products
User’s Manual for InterForm400®
441
Work with X-axis points
You can assign X-axis points to an existing X-axis group, by using option 12=Work with
X-axis points in front of the group as described above.
In the example above, where we have created a group called Month, we might add 12 X-
axis points for that group, marking the 12 months of the year.
Work with X-axis points CHX200D
Chart . . . . . . . . . : SAMPLELINE
Type . . . . . . . . . . : *LINE
X-axis group ID . . . . : G1
Type options, press Enter.
2=Change 3=Copy 4=Delete 5=Display
7=Assign new seq nbr to X-axis point
Opt Seq number ID Text Spc
(No X-axis points to display)
End
F3=Exit F5=Refresh F6=Create F12=Cancel
If you press F6=Create to create a new X-axis point the following is displayed:
Create X-axis group CHX110D
Chart . . . . . . . . . : MYBAR
Type . . . . . . . . . . : *BAR
Seq number . . . . . . . . __1
X-axis group ID . . . . . __A
Text . . . . . . . . . . . Jan.____________________________________________
Text font . . . . . . . . __11
Text font color . . . . . __1
Relative spacing . . . . . _60
F3=Exit F4=Prompt F12=Cancel
Seq number: Sequence number which decides the order of the axis
points.
X-axis point ID: ID of the X-axis point for this specific X-axis group.
This ID must be unique i.e. no other X-axis point can
have the same ID – not even in other X-axis groups.
Text: Text below the chart to mark this point.
Text font/color: Font and color of the text.
Relative spacing: Specifies the spacing in pels between the bars (only used for
bar charts).