Filter
Top Products
460
User’s Manual for InterForm400
®
should use:
1) CFGTCP - Option 10. Work with TCP/IP host table entries
- Insert IP-address and Hostname of the mail server - if used.
2) CHGTCPDMN
- Insert the IP-adresses of Domain Name Servers at INTNETADR
3) Add possible unknown routes to the mail server
CFGTCP - Option 2. Work with TCP/IP routes
4) CHGSMTPA, press F4 to prompt
- Insert *YES to AUTOSTART SMTP server after IPL.
- Insert "HOSTNAME" of mail server at "MAILROUTER" - if used. If you
want to mail directly from the AS/400 you should specify *NONE for the
MAILROUTER.
- Insert *YES as "FIREWALL" if the AS/400 is not able to send directly
through a firewall. The firewall parameter is ignored if you use *NONE for
the MAILROUTER.
5) CHGPOPA
*NO at AUTOSTART, MSGSPLIT = *NOMAX or limit of mail server.
6) STRMSF
- Starts the Mail Server Framework.
7) STRTCPSVR *SMTP
- Starts the SMTP server on the AS/400
The commands STRMSF and STRTCPSVR should be called from the IPL Startup
program of the AS/400.
More information can be found on the IBM web-pages:
http://publib.boulder.ibm.com/pubs/html/as400/v5r1/ic2924/index.htm
(Click on Networking, TCP/IP and E-mail.)
and
http://www-
912.ibm.com/s_dir/slkbase.NSF/0cf528a492c9b4a886%2025680b0002037f/34879f5e413
aa5cd8625697b0053f36a?OpenDocument&Highlight=0,SNDDST,%2520SNADS
Combining SMTP and Domino/400 on the same machine
If you are already running Domino on the same iSeries as the one where you have
InterForm400 installed there will be a problem sending via SMTP unless you e.g. bind the
OS400 SMTP to another IP-address than used for Domino.
An IBM Technical Document describing how to do that can be found via this link:
http://www-912.ibm.com/s_dir/slkbase.NSF/1ac66549a21402188625680b0002037e/b8a7
f2a25678830686256c1c0052e8fa
(Document number 27850433)