Filter
Top Products
User’s Manual for InterForm400®
371
transfer, and others will automatically default to binary transfer if a
random name is entered. Consult the manual for your Printer
Server, or try with eg. PR1).
Examples: Use ‘raw1' for the HP JetDirect, and ‘lp’ for ZebraNet
PrintServer.
See a list of some of the possible queue names at this site:
http://www-
912.ibm.com/s_dir/slkbase.nsf/1ac66549a21402188625680b0002037e/b49aa3cf3ce97d0d862565c2007d4393?OpenDocument&Highlight=0,printing,port,number
Writers to autostart AUTOSTRWTR(1)
Connection Type CNNTYPE(*IP)
Destination Type DESTTYPE(*OTHER)
Transform SCS to ASCII TRANSFORM*YES
(This value could be *NO if the queue should only be
used for print controlled by InterForm400
®
)
Manufac. type & model MFRTYPMDL(*HP4)
(This value is not important if you are only printing
through InterForm400
®
as InterForm400
®
makes the
protocol conversion)
Internet Address INTNETADR(‘222.5.1.235')
(The IP address of your Printer Server. Consult your
system administrator)
Destination options DESTOPT( 'XAIX' )
(This will support e.g. the number of copies specified on
the spool file.)
4. You can verify the connection to the printer using PING from an AS/400
command line:
PING RMTSYS(‘222.5.1.235')
5. Creating and changing a queue for printing LPR will automatically create and start
a printing program on the AS/400. Alternatively the printing program can be
started with the following command:
STRRMTWTR OUTQ(QUSRSYS/PRTXXX)
J TIP J
When setting up printing for a Zebra printer it is recommended to use a remote writer (or
attach through a PC printer port) in order to avoid the printer job ending abnormally.
Attaching through a TN5250E Print Client
TN5250E print clients exist incorporated in print server devices, and as software in
relation to terminal programs like Client Access version 3R2.
Intermate A/S produces external and internal print servers that connects to the AS/400 via
TN5250E. Please refer to the User’s Guide for details on how to configure such a device.