Filter
Top Products
308 User’s Manual for InterForm400
®
Work with Zebra fonts
Fonts and soft fonts which are created/installed for PCL or PDF output cannot be used for
Zebra output. You need to create/install special (soft) fonts for zebra. The options below
are reached through 7. Work with fonts, which can be reached from the InterForm400
Administration Menu.
Note that the Zebra font menu options are only shown if you have defined a Zebra
(=Label) file set in InterForm400.
You may notice, that the resident fonts on the Zebra printers are limited to 2 different
typefaces (CG Triumvirate Bold Condenced and Dot Matrix).
G NOTE G
You can type text in several different codepages on one label. You can specify a
specific codepage on a font number.
G NOTE G
Creation of ZPL output (for Zebra) requires the purchase of the ZPL module for
InterForm400.
Autodownload of soft fonts for Zebra printers works differently than for PCL printers. Soft
fonts for a font number are automatically downloaded unless the soft font is registered as
already downloaded into the flash memory of the printer in ‘13. Work with fonts in
ZEBRA flash memory’.
11. Description of Zebra fonts
Work with Zebra fonts ZEB360D
Position to . . . . . . _____ Font
Type options, press Enter.
2=Change 3=Copy 4=Delete 5=Display 7=Rename
Opt Font Description
_ 2000 CG Triumvirate H= 10.00/W= 5.00
_ 3001 Dot Matrix 11x7 H= 5 /W= 5
_ 4450 PDF417 EC=1 Lsep=CR Esc=§ H=3 W=3
_ 4545 EAN8 Narrow bar width=4 H=100.00
_ 4600 CODE39 Width=4, H=100, YYYY
_ 4700 CODE128 Width= 4 Height=100
_ 4900 I2of5 Width=4 Height=100 Rel.=2.5
End
F3=Exit F5=Refresh F6=Create F12=Cancel
With this option you can define fonts used for Zebra printers in addition to the fonts, that
are already known by the printers. For the standard fonts delivered with the printers see
page 385.
Press F6=Create to create a font or barcode: