Filter
Top Products
268 User’s Manual for InterForm400
®
2. Configure InterForm 400
When you choose option 2. Configure InterForm 400 on the administration menu, you
get the following screen:
Configure InterForm 400 APF101D
1/7
Specify default output queue for users with no individual output queue.
Users may override value when using the system.
Output queue __________
Library __________
Specify default printer type
Printer type . . . __________ (IBM4019 IBM4029 IBM4039
HPII HPIID HPIIP HPIII HPIIID
HPIIIP HP4 HP4D HP4_PJL HP4D_PJL
HP5C HP4500 HP4500D)
Interface __________ (SYSTEM SYSTEM850 SYSTEM852 ASCIIR8
ASCII850 ASCII852 WORKSTN WS31N
WS347N WS348NIDA3X IDA5219 IDA812N)
Allow users to override standard printer type ? Y (Y N)
F3=Exit F12=Cancel
If you are only using one laser printer for manual merges (option 3 in the main menu), you
can specify it here.
If you have more than one laser printer, you may wish to assign printers to users
individually. This is done under Work with InterForm400
®
users.
The advantage of operating with standard output queues is, clearly, that users avoid
having to select an actual output queue each time they enter the InterForm400
®
system.
The system supports a number of different printers. Besides the types mentioned in the
above screen, the system supports all other laser printers which emulates an HP printer. If
your printer is not mentioned, you should specify HPII in the field Printer type. Refer to
page 374 for detailed information on supported printers.
You must also specify, how your printer is connected to the AS/400. See page 378 for
detailed information on supported interfaces (protocol converters). Use ASCII850 if in
doubt.
If you have more than one printer type connected to AS/400, you should allow users to
override the default printer type. Press Enter and the next screen is displayed.