Filter
Top Products
User’s Manual for InterForm400®
411
select *CONTINUOUS if the
media is not separated into labels (in this case you would
probably select *CUTTER for the print mode
parameter).
Media type (MEDIATYPE):
Select *TRANSFER if you use a non heat sensitive
media otherwise use *THERMAL.
G NOTE G
Creation of ZPL output from InterForm400 requires the purchase of the ZPL module for
InterForm400.
The Print ASCII File Command
The APF3812/PRTASCF command prints a ASCII file to an output queue as a SCS spool
file. The ASCII file must be placed in IFS. The contents of the ASCII file must be
PRTCTL(*FCFC), which means the first character of each line is a control code for the
printer. E.g. a ‘1' in position 1 is specifying, that this line is to be printed as the first line of
a new page. All other lines must have a blank in this position.
This command can substitute the OS/400 commands: PRTASCSTMF and
CVTPCLSPLF. The input for CVTPCLSPLF and PRTASCF have to be symbol set ISO-
8859-1 (Latin 1).
The Split Spooled File Command
The command APF3812/SPLITSPLF makes it possible to split an *SCS spooled file
without Auto Forms Control. You only identify the spooled file and an InterForm400 split
definition:
Split Spooled File (SPLITSPLF)
Type choices, press Enter.
Split definition . . . . SPLITDEF __________ Name
Job Name . . . . . . . . JOB __________ Name, *
User Name . . . . . . __________ Name
Job Number . . . . . . ______ 000000-999999
Spooled File Name . . . FILE __________ Name
Spooled File Number . . SPLNBR *LAST 1-999999, *ONLY, *LAST
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
Split definitions will normally be executed through a function B in Auto Forms Control.
Refer to page 148 and 173 for more information.
Spooled File Inspector (SFI)