Filter
Top Products
User’s Manual for InterForm400® 117
3. Merge Spool Entry with Overlay
With option 3 on the main menu you are able to create a printout in which a spool-entry is
merged with an overlay and placed in the default output queue for your session.
Merge Spooled File with Overlay APF730D
Overlay name __________
or Overlay Selector ________
Primary/Secondary set _ 1=Primary 2=Secondary
Spooled file:
Job name __________
User __________
Job number ______
File name __________
Spool file no. ______ Number, *ONLY, *LAST
Code page ______ Number, *INPUT
Merge overprint lines *NO_ *NO, *YES
Form type A4______
Copies _1 (1-255)
Drawer / Papertype *PRINTER (*PRINTER, *INPUT, *OVERLAY, 1-256, Name)
Labels / Continuous 1 1 = Seperate labels 2 = Continuous
Media type 1 1=Termo transfer 2=Termo media
Print mode 1 1=Tear off 2=Rewind 3=Peel off 4=Cutter
Name of output queue to search if spooled file is unknown:
Output queue __________
Library __________
F3=Exit F4=Prompt F12=Cancel
Overlay Name : Name of an overlay in the file-set you have open. F4 will prompt
for overlay names.
Primary/
Secondary Set: If you have defined Copy Management for the overlay (see page
53 and 46) you can test if you have made the correct selection of
overlay elements, by printing the overlay elements for one of the
two sets only. If this field is left blank (default) the system will as
default pick the Primary set.
Overlay Selector: If you have defined an Overlay Selector you can test if it is able
to pick the correct overlay. In this case Overlay Name above
must be blank. (refer to section Working with Overlay selectors
page 122)
Spooled File: Spooled file attributes can be entered here.
There is an alternative to typing all the information manually. If you type the name of an
output queue in the bottom of the screen and press Enter, you can retrieve the
information about the spool entry from a view of the selected output queue by selecting
with option 1: