Filter
Top Products
Command Position Contents Description
User’s Manual for InterForm400®
391
VAN
1 - 2
3 - 5
6 - 6
7 - 11
12 - 12
13 - 17
18 - 18
19 - 23
25 - 27
28 - 28
29 - 33
34 - 34
35 - 39
41 - 43
<&&’
<VAN’
sign (+/-) distance to paper top edge
distance to top edge INPEL
sign (+/-) left end point
distance left end point to left paper edge
INPEL
sign (+/-) right end point
distance right end point to left paper edge
INPEL
line width PPP (0-31)
sign (+/-) move right
move right INPEL
sign (+/-) move down
move down INPEL
number of moves
Draws a horizontal line. The line is
horizontal to the paper rotation,
regardless of rotation of the
contents.
IN indicates measurement in
inches.
PEL indicates measurement in
Pels.
Leading zeros must be filled in.
If a distance is stated without a
leading sign the distance is
calculated relatively to the paper
edge. If a sign (+/-) is stated, the
distance will be calculated
according to the base line of the
current line.
If position 28-43 is filled in, the line
will be repeated as many times as
stated in position 41-43.
LOD
1 - 2
3 - 5
6 - 6
7 - 11
12 - 12
13 - 17
18 - 18
19 - 23
25 - 27
28 - 28
29 - 33
34 - 34
35 - 39
41 - 43
<&&’
<LOD’
sign (+/-) distance to top end point
distance top end point to top paper edge
INPEL
sign (+/-) distance to left paper edge
distance to left paper edge INPEL
sign (+/-) bottom end point
distance bottom end point to top paper edge
INPEL
line width PPP (0-31)
sign (+/-) move right
move right INPEL
sign (+/-) move down
move down INPEL
number of moves
Draws a vertical line. The line is
vertical to the paper rotation,
regardless of rotation of the
contents.
IN indicates measurement in
inches.
PEL indicates measurement in
Pels.
Leading zeros must be filled in.
If a distance is stated without a
leading sign the distance is
calculated relative to the paper
edge. If a sign (+/-) is stated, the
distance will be calculated
according to the base line of the
current line.
If position 28-43 is filled in, the line
will be repeated as many times as
stated in position 41-43
LIN
1 - 2
3 - 5
6 - 6
7 - 11
12 - 12
13 - 17
18 - 18
19 - 23
24 - 24
25 - 29
31 - 33
35 - 35
36 - 36
37 - 41
42 - 42
43 - 47
49 - 51
<&&’
<LIN’
1. Point
sign (+/-) distance top edge
distance to paper top edge INPEL
sign (+/-) distance left edge
distance to left paper edge INPEL
2. Point
sign (+/-) distance top edge
distance to paper top edge INPEL
sign (+/-) distance left edge
distance to left paper edge INPEL
line width PPP (0-31)
round/sharp ends (R S)
sign (+/-) move right
move right INPEL
sign (+/-) move down
move down INPEL
number of moves
Draws a line between 2 points. The
line is oriented to the paper
rotation, regardless of rotation of
the contents.
IN indicates measurement in
inches.
PEL indicates measurement in
Pels..
Leading zeros must be filled in.
If a distance is stated without a
leading sign the distance is
calculated relatively to the paper
edge. If a sign (+/-) is stated, the
distance will be calculated
according to the base line of the
current print line.
If position 36-51 is filled in, the line
will be repeated as many times as
stated in position 49-51.