Filter
Top Products
22 User’s Manual for InterForm400
®
InterForm 400 version 2004.M01 INTER03
DE: Wählen Sie bitte eine Sprache aus, während verwendet zu werden installieren
Eingabetaste --> Weiter
DK: Vælg sprog for instruktioner under denne installation.
Tryk på Enter for at fortsætte.
ES: Seleccione por favor un lenguaje para ser utilizado durante instalan.
Pulse Intro para continuar.
FR: Veuillez choisir la langue à utiliser pendant l'installation.
Appuyez sur ENTREE pour continuer.
GB: Please select a language to be used during install.
Press Enter to continue.
PT: Favor selecionar uma língua a ser usada durante a instalação.
Aperte Enter para continuar.
GB DE=Deutsch, DK=Dansk, ES=Españoles, FR=Français, GB=English, PT=Português
F3=Exit F12=Cancel
4. Confirm on the next screen (with Enter), that you are installing InterForm400.
The screen after that requires you to enter a valid licence type, in order to allow
the installation to proceed. You can also leave it blank and fill it out later.
INS0125 InterForm 400 version 2004.M00 INTER03
Type license information, press Enter.
InterForm 400 license code ____ ____ ____ ____ ____ ____ ____ ____ ____
Notice:
License type and code must match.
InterForm 400 cannot be used before a valid license code is entered.
F3=Exit F12=Cancel
5. In the following screen you can set the preferred language used in
InterForm400. The language can be changed later if needed. This is done by
option 2 at the Administration menu to change the global settings for
InterForm400
®
or use option 4 to select language for specific InterForm400
®
users.
Note: InterForm400
®
CL commands like MRGSPLFPDF, APF3812 etc. will be
installed in the language chosen here, and can not be changed unless a
re-installation is made.