Filter
Top Products
142 User’s Manual for InterForm400
®
Seqnbr Function
1.0 1 Merge with overlay
Labels/Continuous . _ 1=Labels 2=Continuous
Media type . . . . . _ 1=Termo transfer 2=Termo media
Print mode . . . . . _ 1=Tear off 2=Rewind 3=Peel off 4=Cut
Labels / Continuous: Select 1=Labels if the media contains of separate labels. select
2=Continuous if the media is not separated into labels (in this
case you would probably select 4=Cut for the print mode
parameter).
Media type: Select 1=Termo transfer if you use a non heat sensitive media
otherwise use option 2=Transfer media.
Print mode: 1=Tear off mean that you will manually tear of the labels.
2=Rewind can be used for rewinding all printed labels onto
another roll. This requires special hardware installed.
3= Peel off will print only one label at a time waiting for the current
label to be peeled off. (This also requires additional hardware).
4=Cut (requires hardware cutter) normally cuts the media for each
print job unless you use 2=Continuous - then 4=Cut will cut out
each label.
In the following screen the spool attributes for the final output is entered:
Update AFC-functions attached to output queues AFC305D
Output queue . . . . : PRTHP3_AFC
Library . . . . . : QUSRSYS
Seqnbr Funct Form type Save Jobname Filename Device file Program
Seqnbr Function
1,0 1 Merge with overlay
Output spooled file name . __________ *INPUT, Navn
User data . . . . . . . . __________ *INPUT, *JOB, *USER ...
Seperator drawer . . . . . ________ *NONE, *DEFAULT, Number
Hold output spooled file . ____ *NO, *YES
Save output spooled file . ____ *NO, *YES
Archive in InfoStore/400 . _ 1=PCL, 2=PCL and SCS
Archive ID . . . . . . . ________
F3=Exit F13=Fold/Unfold F11=Delete F12=Cancel
Output spooled
file name: This entry controls the spool file name.
User data: You can change the spool file description of the resulting print data,
so the spool file can be located on the output queue. By entering
*PAGES, InterForm400
®
will display the number of pages included
in the output from the merge process in the User data field. This is
convenient when using the interface types ASCII850 and ASCIIR8.
These types produces output with datatype *ASCII, which result in
the spool queue displaying *1 for number of pages. When inserting
the keyword *PAGES the following field will be displayed: