Intermate iSeries Stepper Machine User Manual


 
User’s Manual for InterForm400® 55
NW: Radius in pels for the North West corner of the frame
NE: Radius in pels for the North East corner of the frame
SW: Radius in pels for the South West corner of the frame
SE: Radius in pels for the South East corner of the frame
Color
Printing: When working in a file-set defined for color printing, the frame definitions
will offer an additional pattern setting for color print. When having
selected a color INK setting prior to the frame settings, this color INK
selection will then be used for the printed frame and pattern. Frames
defined with Thickness in pels (if any), will always be printed as a solid
line.
Seqnbr. Type Inch.pel Repetition
3.0 1 Frame Top edge ______ Move right _______
Left edge ______ Move down _______
Right edge ______ Extra times ___
Bottom edge ______
Thickness in pels __3 NW NE SW SE
Round/Sharp (R S) S Radius __ __ __ __
Pattern, B/W-prt _ F4=List
Pattern, color-prt B F4=List
F3=Exit F4=Prompt F11=Delete F12=Cancel
F13=Set view/print parameters F14=PCL-view
2=HORIZONTAL LINE
Seqnbr. Type Inch.pel Repetition
1 2 Horizontal line
From top edge ______ Move right ______
Left end ______ Move down ______
Right end ______ Extra times ___
Thickness in pels ___
F3=Exit F12=Cancel F18=View Spool entry
From Top
Edge: Inches, pels absolute to the upper edge of a portrait page
regardless of the rotation specified by the global settings for the overlay.
Left end: Inches, pels absolute to the left edge of a portrait page regardless of the
rotation specified by the global settings for the overlay.
Right end: Inches, pels absolute to the left edge of a portrait page regardless of the
rotation specified by the global settings for the overlay.
Thickness
in pels: Thickness of a line in pels (1/240"). Zero means no border.
Move right: Inch,pels of the right movement of a duplicate of the line relative to the
value for left edge
Move Down: Inch,pels of the vertical movement of a duplicate of the line relative to the
value for Top edge
Extra times: Extra copies of the line excluding the original. Extra copies will be
displaced relative to each other according to the settings of Move right
and Move Down.