Filter
Top Products
104 User’s Manual for InterForm400
®
Step 17. Cleaning the Overlay for Remaining Text
If you printed the overlay at this stage, you will discover that the original text used for re-
mapping are still visible.
On purpose we have not used “B=Blank after” in the Remap Window commands, as we
have not been sure that we would have needed the text for other purposes.
Instead we have waited to this moment, where we will clean all remaining text by a single
command.
We define our last sequence line 31:
Design InterForm 400 overlay APF300D
Overlay name: MYDEMO Overlay text: MYDEMO
Seqnbr. Type Overlay definition
0025 9 Remap window 30-042 pos 08-014 top 5,100 left 2,000 C
0026 9 Remap window 30-042 pos 15-025 top 5,100 left 3,000 C
0027 9 Remap window 30-042 pos 26-039 top 5,100 left 4,000 C
0028 9 Remap window 30-042 pos 40-053 top 5,100 left 5,000 C
0029 9 Remap window 30-042 pos 54-070 top 5,100 left 6,000 C
0030 ? If lin 030-042 pos 047-047 = 2 Then LIGHT
Seqnbr. Type
31,0 8 Tabulator
Input: Line __1 - _80
Position __1 - _70
Print: From left edge ____14 Adjustment L (U L C R N B +)
Font __11 F4=List
Condition: Position ___ - ___
Is > = < N _ __________________________
Blank after _ B = Blank condition after
F3=Exit F4=Prompt F18=DSPSPLF F12=Cancel
Here we define one large tabulator which operates on the area from line 1 to 70 and
position 1 to 80. Anything which not already have been fomatted by Tabulators or Remap
Window commands will now be moved 14 inches to the right. Moving text beyond the
paper edge will cause InterForm400
®
to discard the text.
We press Enter to save our last sequence line.