Filter
Top Products
312 User’s Manual for InterForm400
®
Using soft fonts for printing on Zebra
When you create fonts in the range 5000-9999 this screen is shown:
Create ZEBRA font ZEB370D
Font . . . . . . . . . . . 5655 Other fonts
Description . . . . . . . . Arial 12___________________________________
Height . . . . . . . . . . _12.00 1.00-792.00
Relative width . . . . . . 1.00 0.20-5.00
Special EBCDIC codepage . . _____
Soft font member name per symbolset
Western . . . . . . . . . ARIAL_____
Central European . . . . __________
Baltic . . . . . . . . . __________
Turkish . . . . . . . . . __________
Cyrillic . . . . . . . . __________
Greek . . . . . . . . . . __________
Arabic . . . . . . . . . __________
Hebrew . . . . . . . . . __________
Special . . . . . . . . . __________
F3=Exit F4=Prompt F12=Cancel
Height: The height of the font.
Relative width:
The relative width of the font i.e. 1 equals the standard width and 2 equals
a font twice as wide as the standard font.
Special EDCDIC
codepage: The EBCDIC codepage to use when printing using this font - if the default
codepage is not to be used. In this manner you can print text in several
different codepages on one label.
Soft font member:
Specify previously installed soft fonts for each symbolset, that you want to
use.
G NOTE G
If you install and use a fixed soft font you may notice, that the font size should also be
specified in height even though pitch or CPI would be the normal way to measure it.
Examples: A height of 10 equals a CPI of 12 and a height of 12 equals a CPI of 10.