Filter
Top Products
User’s Manual for InterForm400® 41
Select Parameters for view / Print APF730D
Overlay name __________
or Overlay Selector ________
Primary/Secondary set _ 1=Primary 2=Secondary
Spooled file:
Job name __________
User __________
Job number ______
File name __________
Spool file no. ______ Number, *ONLY, *LAST
Code page ______ Number, *INPUT
Form type A4________
Copies __1 (1-255)
Drawer / Paper type *PRINTER__ (*PRINTER, *INPUT, *OVERLAY, 1-255, Name)
View format _ 1=PCL 2=B/W PDF 3=Color PDF
Name of output queue to search if spooled file is unknown:
Output queue __________
Library __________
F3=Exit F4=List overlays
Overlay Name Name of an overlay in the file-set you want to view together with
a spool file when using the PCL viewer (F14). This is required,
though the information is used for PCL viewing only.
Primary/
Secondary Set: If you have defined Copy Management for the overlay (see
page 53 and 46) you can test if you have made the correct
selection of overlay elements, by printing the overlay elements
for one of the two sets only. If this field is left blank (default) the
system will as default pick the Primary set.
Overlay Selector: If you have defined an Overlay Selector you can test if it is able
to pick the correct overlay. In this case Overlay Name above
must be blank. (refer to section Working with Overlay
selectors page 122)
Spooled File: Spooled file attributes can be entered here.
There is an alternative to typing all the information manually. If you type the name of an
output queue in the bottom of the screen and press Enter, you can fetch the
information about the spool entry from a view of the selected output queue by selecting
with option 1: