Filter
Top Products
User’s Manual for InterForm400® 327
Import PCL file
Press F6 to load a PCL file into InterForm400
®
Load PCL-file PCL110D
PCL-file . . . . . . . . . ________
Description . . . . . . . _______________________________________________
Load from . . . . . . . . _ 1=PC-file in folder APF3812
2=Output queue
F3=Exit F12=Cancel
Enter the member name into which you want to add the PCL file, and which is referred to
in an overlay definition.
Enter whether you want to read the PCL file from a spool file or from the folder system. In
both cases a HP-PCL driver have been used to format the overlay created in a PC
application.
If reading from the folder APF3812, the PCL driver should be configured to print to a file.
Either directly into the folder APF3812, or to the local hard drive and copied to the folder.
If reading from output queue the PCL driver must be defined to print on a local printer on
the AS/400 through Client Access.
When PCL-File and Load From is defined, the selection for the PC file will appear. If
selecting read from the folder APF3812, you will be able to use F4 to list available files
Load PCL-file PCL110D
PCL-file . . . . . . . . : PH
Description . . . . . . : ________________________________________________
Load from . . . . . . . : 1 1=PC-file in folder APF3812
2=Output queue
From PC-file . . . . . . . ____________
F3=Exit F4=List F12=Cancel
J TIP J
You can use the PCLTOMBR command to import multiple B/W PCL files from e.g. the
APF3812 folder.