Filter
Top Products
Command Groups
2–28
TLS 216 Programmer Manual
Table 2–18: Trigger Commands (Cont.)
Header Description
TRIGger:DELay:PULse:CLAss Select the pulse trigger class: Width Or Glitch
TRIGger:DELay:PULse:GLItch? Return glitch trigger parameters
TRIGger:DELay:PULse:GLItch:
POLarity
Select glitch polarity: Positive Or Negative
TRIGger:DELay:PULse:GLItch:
WHEN
Sets tT, or u,T time out
TRIGger:DELay:PULse:GLItch:
WIDth
Set glitch trigger to discriminate
between glitch and valid pulse
TRIGger:DELay:PULse:SOUrce Identify the pulse trigger channel
TRIGger:DELay:PULse:WIDTH? Return pulse width settings
TRIGger:DELay:PULse:WIDth:
HIGHLimit
Set pulse trigger maximum pulse width
TRIGger:DELay:PULse:WIDth:
LOWLimit
Set pulse trigger minimum pulse width
TRIGger:DELay:PULse:WIDth:
POLarity
Set pulse trigger: Plus Or Minus
TRIGger:DELay:PULse:WIDth:
WHEn
Set pulse trigger when pulse detected or when
not detected
TRIGger:DELay:SEQuence? Return delay sequence settings
TRIGger:DELay:SEQuence:END? Return delay sequence end settings
TRIGger:DELay:SEQuence:END:
AUXiliary
Identify the logic level expected at the
Auxiliary Trigger input End Event for delay
sequence trigger: H (High), L (Low), or X
(Don’t Care)
TRIGger:DELay:SEQuence:END:
CH<x>
Identity the logic level expected at the Ch x
End Event for delay sequence trigger: H
(High), L (Low), or X (Don’t Care)
TRIGger:DELay:SEQuence:END:
INPut
Set the decimal numbers which, when
converted to binary, comprise the Stop Event
pattern and mask to the delay sequence
trigger
TRIGger:DELay:SEQuence:END:
LOGic
Set the logic function applied to the main
sequence trigger inputs for the end event:
AND, OR, NAND, NOR
TRIGger:DELay:SEQuence:LIMIT? Return delay sequence limit settings
TRIGger:DELay:SEQuence:LIMIT:
WHEN
Select the triggering criteria for the time-quali-
fied delay sequence trigger: Less Than, More
Than, or Not in Time