Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–315
FALLing
RISing
<Space>
?
TRIGger
:
MAIn
:
STATE SLOpe
:
RISing specifies to trigger on the rising transition (positive) edge of a signal.
FALLing specifies to trigger on the falling transition (negative) edge of a signal.
TRIGGER:MAIN:STATE:SLOPE RISING
instructs the logic scope to trigger on the rising transition edge of the signal.
TRIGGER:MAIN:STATE:SLOPE?
might return FALLING, indicating the logic scope is triggering on the falling
transition edge of the signal.
TRIGger:MAIn:TYPe
Sets or queries the main trigger type. Using this command is equivalent to
setting Type in the Trigger menu.
Trigger
TRIGger:MAIn:TYPe { EDGE | PULse | PATtern | STATE | SEQuence }
TRIGger:MAIn:TYPe?
TRIGger :
:
MAIn
TYPe
<Space>
PATtern
?
STATE
PULse
EDGE
SEQuence
EDGE is a normal trigger. A trigger event occurs when a signal passes through a
specified voltage level in a specified direction. The conditions are controlled by
the TRIGger:MAIn:EDGE commands.
PULse specifies that a trigger occurs when a pulse meets specified conditions
related to its width.
Arguments
Examples
Group
Syntax
Arguments