Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–229
*TRG
*TRG
immediately executes all commands defined by *DDT.
TRIGger
Forces a trigger event to occur, returns the current trigger parameters.
Trigger
TRIGger FORCe
TRIGger?
TRIGger
FORCe
?
<Space>
FORCe creates a trigger event. If TRIGger:STATE is REAdy, the acquisition will
complete, otherwise this argument will be ignored. Using this argument is
equivalent to pressing the front panel FORCE TRIGGER button.
TRIGGER FORCe
forces a trigger event to occur.
TRIGGER?
might return :TRIGGER:THRESHOLD:CH1 0.0E+0;CH2 0.0E+0;CH3
0.0E+0;CH4 0.0E+0;CH5 0.0E+0;CH6 0.0E+0;CH7 0.0E+0;CH8
0.0E+0;CH9 0.0E+0;CH10 0.0E+0;CH11 0.0E+0;CH12 0.0E+0;CH13
0.0E+0;CH14 0.0E+0;CH15 0.0E+0;CH16 0.0E+0;:TRIGGER:MAIN:MODE
AUTO;TYPE EDGE;LEVEL 0.0E+0;HOLDOFF:VALUE 0;:TRIGGER:MAIN:
EDGE:SOURCE CH1;SLOPE RISE;:TRIGGER:MAIN:PATTERN:QUALIFIER
LIMIT;LIMIT:WHEN MORETHAN;WIDTH 2.0E-9;:TRIGGER:MAIN:PATTERN:
RANGE:WHEN INSIDE;HIGHLIMIT 2.0E-9;LOWLIMIT 2.0E-9;:TRIGGER:
MAIN:PATTERN:INPUT 65537,1;LOGIC AND;:TRIGGER:MAIN:STATE:
INPUT 65537,1;LOGIC AND;CLOCK CH1;SLOPE RISE;:TRIGGER:MAIN:
SEQUENCE:QUALIFIER LIMIT;LIMIT:WHEN MORETHAN;WIDTH 2.0E-9;
:TRIGGER:MAIN:SEQUENCE:RANGE:WHEN INSIDE;HIGHLIMIT 2.0E-9;
LOWLIMIT 2.0E-9;:TRIGGER:MAIN:SEQUENCE:START:LOGIC AND;INPUT
65537,1;:TRIGGER:MAIN:SEQUENCE:END:LOGIC AND;INPUT 65537,2;
:TRIGGER:MAIN:PULSE:CLASS GLITCH;SOURCE CH1;GLITCH:WIDTH
2.0E-9;WHEN LESSTHAN;POLARITY POSITIVE;:TRIGGER:MAIN:
Examples
Group
Syntax
Arguments
Examples