Filter
Top Products
Command Descriptions
2–288
TLS 216 Programmer Manual
TRIGger :
:
PULse
MAIn ?
TRIGGER:MAIN:PULSE?
might return :TRIGGER:MAIN:PULSE:CLASS GLITCH;SOURCE CH1;
GLITCH:WIDTH 2.0E-9;WHEN LESSTHAN;POLARITY POSITIVE;:TRIGGER:
MAIN:PULSE:WIDTH:LOWLIMIT 2.0E-9;HIGHLIMIT 2.0E-9;WHEN
WITHIN;POLARITY POSITIVE.
TRIGger:MAIn:PULse:CLAss
Sets or queries the class used for main pulse triggering. This command is
equivalent to selecting Glitch or Width from the main pulse trigger class menu.
Trigger
TRIGger:MAIn:PULse:CLAss { GLItch | WIDth }
TRIGger:MAIn:PULse:CLAss?
WIDth
TRIGger :
:
PULse
MAIn :
CLAss
<Space>
?
GLItch
GLItch triggers when a pulse is found that is of the specified polarity and width.
These are set with the commands TRIGger:MAIn:PULse:GLItch:POLarity and
TRIGger:MAIn:PULse:GLItch:WIDth.
WIDth triggers when a pulse is found that has the specified polarity and is either
inside or outside the limits as specified by TRIGger:MAIn:PULse: WIDth:LOW-
Limit and TRIGger:MAIn:PULse:WIDth:HIGHLimit. The polarity is selected
using the TRIGger:MAIn:PULse:WIDth:POLarity command.
TRIGGER:MAIN:PULSE:CLASS WIDTH
specifies the Width class for the main pulse trigger.
TRIGGER:MAIN:PULSE:CLASS?
might return GLITCH, specifying main pulse triggering meeting the polarity
and width criteria set by the TRIGger:MAIn:PULse:GLItch:POLarity and
WIDth commands.
Examples
Group
Syntax
Arguments
Examples