Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–279
TRIGger
:
MAIn
PATtern
?
:
TRIGGER:MAIN:PATTERN?
might return TRIGGER:MAIN:PATTERN:CLASS RANGE;TRIG WHEN WITHĆ
IN;LOGIC AND; as the current main pattern trigger parameters.
TRIGger:MAIn:PATtern:AUXiliary
Sets or queries the Boolean requirement (a logic level of level of High, Low, or
Don’t Care) for the rear panel connector labeled AUX TRIGGER INPUT. The
Boolean requirements for all inputs define the logic pattern that triggers the logic
scope. Using this command is the same as setting the auxiliary bit in the Define
Pattern menus found in the Pattern Trigger menu for the main trigger.
Trigger
TRIGger:MAIn:PATtern:AUXiliary { HIGH | LOW|X}NOTE: defines
AUXiliary pattern bit to H,L,X
TRIGger:MAIn:PATtern:AUXiliary?
TRIGger
:
MAIn
PATtern :
:
AUXiliary
LOW
X
<Space>
?
HIGH
HIGH specifies that the AUX TRIGGER INPUT must be High relative to the
threshold level.
LOW specifies that the AUX TRIGGER INPUT must be Low relative to the
threshold level.
X specifies that the AUX TRIGGER INPUT can be either High or Low relative
to the threshold level.
TRIGGER:MAIN:PATTERN:AUXILIARY LOW
specifies that the AUX TRIGGER INPUT must be Low to meet the Boolean
requirements of the defined pattern.
TRIGGER:MAIN:PATTERN:AUXILIARY?
might return X, indicating the AUX TRIGGER INPUT may be either High or
Low relative to the to the threshold level.
Examples
Group
Syntax
Arguments
Examples