Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–225
SELect:REF<x>?
SELect :
REF
<Space>
ON
?
OFF
<x>
<NR1>
ON or <NR1> = 1 turns on the display of the specified group.
OFF or <NR1> = 0 turns off the display of the specified group.
SELECT:REF4 ON
turns on the display of group 4.
SELECT:REF3?
might return 1, indicating that reference group 3 is currently being displayed.
SET? (Query Only)
Returns a string listing the logic scope settings, except for configuration
information for the calibration values. You can use this string to return the logic
scope to the state it was in when you made the SET? query. This command is
identical to the *LRN? command.
Miscellaneous
HEADer, *LRN?, VERBose
SET?
SET
?
NOTE. The SET? query always returns a string with command headers,
regardless of the setting of the HEADer command. The string may be sent back
to the logic scope as a command string, if desired. The VERBose command can
still be used to specify whether the returned headers should be abbreviated or
full length.
Arguments
Examples
Group
Related Commands
Syntax