Filter
Top Products
Command Descriptions
2–146
TLS 216 Programmer Manual
HORizontal:DELay:SECdiv
This command is identical to the HORizontal:DELay:SCAle command.
Horizontal
HORizontal:DELay:SECdiv <NR3>
HORizontal:DELay:SECdiv?
:
SECdiv
:
DELay
HORizontal
?
<Space> <NR3>
<NR3> is the time per division. The range is 5 s to 500 ps in a 1-2.5-5 sequence.
Values not set to the specified sequence will be adjusted to the closest valid
value. If the delayed time base scale is set slower than the main time base scale,
both the main and delayed time base scales will be set to the delay scale value.
HORIZONTAL:DELay:SECdiv 2.0E-6
sets the delay scale to 2 ms per division.
HORIZONTAL:DELay:SECdiv 9.0E-6
sets the delay scale to 10 ms per division. Since 9 ms is not a valid value
within the 1-2.5-5 sequence, it is automatically set to the closest valid value.
HORIZONTAL:DELay:SECdiv?
might return 1.0E-3, indicating that the delay time is 1 ms per division.
HORizontal:DELay:TIMe
Sets or queries the delay time following the main trigger before the delayed time
base triggers. Using this command is equivalent to setting Time Base to Delayed
Runs After Main in the Horizontal menu.
Horizontal
HORizontal:DELay, HORizontal:DELay:MODe, TIMe:RUNSAfter?, HORizon-
tal:DELay: TIMe:TRIGAfter?
HORizontal:DELay:TIMe <NR3>
Group
Syntax
Arguments
Examples
Group
Related CommandsRelated Commands
Syntax