Filter
Top Products
Appendix D: Factory Initialization Settings
D–2
TLS 216 Programmer Manual
Table D–1: Factory Initialization Defaults (Cont.)
Control Changed by Factory Init to
Display color – persistence palette Temperature
Display format YT
Display graticule type Full
Display intensity – text/graticule 60% (100%)
Display intensity – waveform 80% (100%)
Display interpolation filter Sin(x)/x
Display style Vectors
Display trigger bar style Short
Display trigger “T” On
Display variable persistence 500 ms
Edge trigger threshold (Main and Delayed) 0.0 V
Edge trigger slope (Main and Delayed) Rising
Edge trigger source (Main and Delayed) Channel 1
Group definition First, last, and selected channel = Channel 1
Group selection Group 1, containing Channel 1 only, is on; all
other groups off
Group display mode Analog
Group display thresholds Vhigh min = 2.00 V; Vlow, max = 800 mV
Group display height 1.0 Divs
Horizontal – delay trigger position 50%
Horizontal – delay trigger record length 500 points (10 divs)
Horizontal – delay time/division 50 ms
Horizontal – main trigger position 50%
Horizontal – main trigger record length 500 points (10 divs)
Horizontal – main time/division 500 ms
Horizontal – time base Main only
Main trigger holdoff 0%
Main trigger mode Auto
Main trigger type Edge
Measure Delay to Channel 1 (Ch1)
Measure Delay edges Both rising and forward searching
Measure High-Low Setup Histogram
Measure High Ref 90% and 0 V (units)