Filter
Top Products
Command Descriptions
2–218
TLS 216 Programmer Manual
RS232:PARity { EVEN | ODD | NONe }
RS232:PARity?
:
RS232
PARity
<Space>
EVEN
?
ODD
NONe
EVEN indicates the parity bit is sent with even parity and bytes received are
expected to have even parity.
ODD indicates the parity bit is sent with odd parity and bytes received are
expected to have odd parity.
NONe indicates that no parity bit is sent and none are expected.
RS232:PARITY EVEN
sets the parity to even.
RS232:PARITY?
might return NONE, indicating parity is turned off.
RS232:SOFTFlagging
Sets or queries the input and output soft flagging over the RS-232 port. It stops
transmitting data any time it receives an XOFF (DC3) character. It sends an
XOFF character when its 512 byte input buffer has 80 free bytes. The logic
scope begins transmitting data again when it receives an XON (DC1) characters.
It sends XON when its input buffer is has 100 free bytes.
RS232
RS232:SOFTFlagging { ON | OFF | <NR1> }
RS232:SOFTFlagging?
Syntax
Arguments
Examples
Group
Syntax