Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–215
*RST (No Query Form)
Resets the logic scope to a known state; does not purge any aliases or stored
settings.
Status and Error
FACtory, *PSC, *RCL, RECAll:SETUp, *SAV, SAVe:SETUp
*RST
*RST
*RST returns the instrument settings to the factory defaults (see Appendix D).
The *RST command does not alter the following:
H the state of the IEEE Std 488.1-1987 interface
H the selected IEEE Std 488.1-1987 address of the logic scope
H calibration data that affect device specifications
H the Output Queue
H the Service Request Enable Register setting
H the Standard Event Status Enable Register setting
H the power on status clear flag setting
H alias definitions
H stored settings
H the *PUD? response
Group
Related Commands
Syntax