Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–147
HORizontal:DELay:TIMe?
?
<Space> <NR3>
:
DELay
:
HORizontal
TIMe
:
<NR3> is the time in seconds, between the main trigger and the delayed trigger.
The delay range is 16 ns to 250 seconds with a resolution of 2 ns.
HORIZONTAL:DELAY:TIME 2.0E-3
sets the delay time between the main and delayed time base to 2 ms.
HORIZONTAL:DELAY:TIME?
might return :HORIZONTAL:DELAY:TIME:16.0E-9 for the delay time.
HORizontal:DELay:TIMe:RUNSAfter
Sets or queries the delay time following the main trigger before the delayed time
base begins. Using this command is equivalent to setting Time Base to Delayed
Runs After Main in the Horizontal menu.
Horizontal
HORizontal:DELay:MODe
HORizontal:DELay:TIMe:RUNSAfter <NR3>
HORizontal:DELay:TIMe:RUNSAfter?
RUNSAfter
?
<Space> <NR3>
:
DELay
:
HORizontal
TIMe
:
<NR3> is the time, in seconds, between when the logic scope receives a valid
main trigger and when it forces the delayed trigger. The range is from 16 ns to
250 seconds with a resolution of 2 ns.
HORIZONTAL:DELAY:TIME:RUNSAFTER 2.0E-3
sets the delay time between the main and delayed time base to 2 ms.
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Examples