Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–231
TRIGger:DELay:BY
Selects whether the delayed trigger occurs after a specified number of events or a
specified period of time following the main trigger. Using this command is
equivalent to setting Delay by in the Delayed Trig menu.
Trigger
TRIGger:DELay:EVENTS:COUNt, TRIGger:DELay:TIMe
TRIGger:DELay:BY { EVENTSTime | EVENTS | TIMe }
TRIGger:DELay:BY?
EVENTSTime
: DELayTRIGger
<Space>
?
EVENTS
TIMe
:
BY
EVENTSTime introduces a specified time following a specified number of delay
trigger events proceeding the main trigger event. For example in examining a
pulse train, you might use the main trigger to detect the start of the train, use the
Delay By Events to go to the position of interest within the pulse train, then
implement the Time Delay to wait a specified time before starting the data
acquisition.
EVENTS sets the delayed trigger to occur after a specified number of trigger
events following the main trigger event. The number of events is specified by
TRIGger:DELay:EVENTS:COUNt.
TIMe sets the delayed trigger to occur after a specified time following the main
trigger event. The time period is specified by TRIGger:DELay:TIMe.
TRIGGER:DELAY:BY TIMe
sets the trigger delay to TIME
TRIGGER:DELAY:BY?
might return EVENTS.
Group
Related Commands
Syntax
Arguments
Examples