Filter
Top Products
Command Descriptions
2–294
TLS 216 Programmer Manual
TRIGger:MAIn:PULse:WIDth:POLarity
Sets or queries the polarity for the main pulse width trigger. Using this command
is equivalent to selecting the polarity in the Pulse Width Polarity side menu.
Trigger
TRIGger:MAIn:PULse:WIDth:POLarity { NEGAtive | POSITIVe }
TRIGger:MAIn:PULse:WIDth:POLarity?
TRIGger :
:
PULse
MAIn
WIDth :
POLarity
<Space>
?
:
POSITIVe
NEGAtive
NEGAtive specifies a negative pulse.
POSITIVe specifies a positive pulse.
TRIGGER:MAIN:PULSE:WIDTH:POLARITY NEGATIVE
sets the main pulse width trigger polarity to negative.
TRIGGER:MAIN:PULSE:WIDTH:POLARITY?
might return POSITIVE, indicating the main pulse width trigger polarity is
positive.
TRIGger:MAIn:PULse:WIDth:WHEn
Sets or queries the main pulse width parameters of when the logic scope triggers.
The parameters define when the trigger event must end to trigger the logic scope.
This command is equivalent to selecting the condition of the Pulse Width Trigger
When side menu.
Trigger
TRIGger:MAIn:PULse:WIDth:WHEn { OUTside | WIThin }
TRIGger:MAIn:PULse:WIDth:WHEn?
Group
Syntax
Arguments
Examples
Group
Syntax