Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–271
TRIGGER:DELAY:STATE:LOGIC AND
applies AND logic to the delay state trigger input channels.
TRIGGER:DELAY:STATE:LOGIC?
might return OR, indicating the logic applied to the delay state trigger inputs.
TRIGger:DELay:STATE:SLOpe
Sets or queries the transition edge (rising or falling) that triggers logic scope.
Trigger
TRIGger:DELay:STATE:SLOpe { RISing | FALLing }
TRIGger:DELay:STATE:SLOpe?
: DELayTRIGger STATE :
<Space>
?
: SLOpe
RISing
FALLing
RISing instructs the logic scope to trigger on the rising transition (positive) edge
of a signal.
FALLing instructs the logic scope to trigger on the falling transition (negative)
edge of a signal.
TRIGGER:DELAY:STATE:SLOPE RISING
instructs the logic scope to trigger on the rising edge of the input signal.
TRIGGER:DELAY:STATE:SLOPE?
might return FALLING, indicating the logic scope triggers on the falling edge
of the input signal.
TRIGger:DELay:TIMe
Sets or queries the delay time when HORizontal:DELay:MODe is set to
TRIGAfter. This command is identical to the HORizontal:DELay:TIMe:TRIG-
After command, and is equivalent to setting the Delay by Time value in the
Delayed Edge Delay side menu.
Examples
Group
Syntax
Arguments
Examples