Filter
Top Products
Command Descriptions
2–88
TLS 216 Programmer Manual
DATa
:
WIDth
?
<Space> <NR1>
<NR1> = 1 specifies there is 1 byte (8 bits) per point. This format is useful when
the acquisition mode is set to SAMple on ENVelope. If used for AVErage, the
low order byte is not transmitted.
<NR1> = 2 specifies there are 2 bytes (16 bits) per point. This format is useful
with AVErage waveforms. If used for ENVelope or SAMple, the least significant
byte is always zero.
DATA:WIDth 1
sets the data width to 1 byte per data point for CURVe data.
DATE
Sets or queries the date the logic scope displays.
Miscellaneous
DISplay: CLOCk, TIMe
DATE <QString>
DATE?
<QString>
DATE
<Space>
?
<QString> is a date in the form yyyy-mm-dd".
mm refers to a two-digit month number from 01 to 12.
dd refers to a two-digit day number in the month.
yyyy refers to a four-digit year number.
There must be a dash (–) after yyyy and mm.
DATE "1993-01-24"
sets the date to January 24, 1993.
DATE?
might return “1993–12–10”
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Examples