Filter
Top Products
Command Groups
TLS 216 Programmer Manual
2–21
Table 2–13: Measurement Commands
Header Description
MEASUrement? Return all measurement parameters
MEASUrement:CLEARSNapshot Remove measurement snapshot
MEASUrement:GATING Set or query measurement gating
MEASUrement:IMMed? Return immediate measurement parameters.
MEASUrement:IMMed:CLOCk? Return immediate measurement clock
parameters
MEASUrement:IMMed:CLOCk:
DIREction
Set the clock source direction for a group
measurement
MEASUrement:IMMed:CLOCk:
EDGE
Set the clock source edge for a group
measurement
MEASUrement:IMMed:CLOCk:
SOUrce
Set the clock source for a group measurement
MEASUrement:IMMed:DELay? Return immediate delay measurement settings
MEASUrement:IMMed:DELay:
DIREction
Select search direction for delay measure-
ments
MEASUrement:IMMed:DELay:
EDGE1
Select waveform edge for delay measure-
ments
MEASUrement:IMMed:DELay:
EDGE2
Select waveform edge for delay measure-
ments
MEASUrement:IMMed:SOURCE1 Set the measurement source (channel)
MEASUrement:IMMed:SOURCE2 Set the second (channel) measurement source
(delay or “to” channel)
MEASUrement:IMMed:TYPe Identify the measurement to be taken
MEASUrement:IMMed:UNIts? Return measurement units
MEASUrement:IMMed:VALue? Return measurement result
MEASUrement:MEAS<x>? Return parameters on measurement
MEASUrement:MEAS<x>:CLOCk? Return current clock parameters for the
measurement specified by MEAS<x>
MEASUrement:MEAS<x>:CLOCk:
DIRection
Set the clock source direction for a group
measurement
MEASUrement:MEAS<x>:CLOCk:
EDGE
Set the clock source edge for a group
measurement
MEASUrement:MEAS<x>:CLOCk:
SOUrce
Set the clock source for a group measurement
MEASUrement:MEAS<x>:DELay? Return delay measurement parameters
MEASUrement:MEAS<x>:DELay:
DIRection
Set search direction for delay measurements