Filter
Top Products
Command Groups
TLS 216 Programmer Manual
2–27
Table 2–18: Trigger Commands
Header Description
TRIGger Force trigger event; return parameters
TRIGger:DELay Set the delay trigger level to 50%
TRIGger:DELay:BY Set delay by time or events
TRIGger:DELay:EDGE? Return parameters set for delay edge trigger
TRIGger:DELay:EDGE:SLOpe Set slope for the delay edge trigger
TRIGger:DELay:EDGE:SOUrce Set source for delay trigger source
TRIGger:DELay:EVENTS? Return delay trigger event parameters
TRIGger:DELay:EVENTS:COUNt Set events count for delay by events
TRIGger:DELay:PATtern? Return all delayed pattern trigger settings
TRIGger:DELay:PATtern:AUXiliary Identify the logic level expected for Auxiliary
Trigger in the delay trigger pattern: H (High), L
(Low), or X (Don’t Care)
TRIGger:DELay:PATtern:CH<x> Identify the logic level expected for Ch x in the
delay pattern trigger: H (High), L (Low), or X
(Don’t Care)
TRIGger:DELay:PATtern:INPut Select the decimal numbers which, when
converted to binary, comprise the delay trigger
pattern and mask
TRIGger:DELay:PATtern:LIMIT? Return the delay time-qualified trigger pattern
parameters.
TRIGger:DELay:PATtern:LIMIT:
WHEN
Identify the triggering criteria for the time-quali-
fied delay pattern trigger: Less Than, More
Than, Time Out
TRIGger:DELay:PATtern:LIMIT:
WIDth
Set pattern duration for delay pattern trigger
TRIGger:DELay:PATtern:LOGIC Select the logic applied to the delay trigger
pattern: AND, OR, NAND, NOR
TRIGger:DELay:PATtern:QUALifier Select the qualifier for the delay pattern
trigger: Limit or Range
TRIGger:DELay:PATtern:RANge? Return the main pattern trigger range
parameters.
TRIGger:DELay:PATtern:RANge:
HIGHLimit
Set the upper time limit of the range for the
range-qualified delay pattern trigger
TRIGger:DELay:PATtern:RANge:
LOWLimit
Set the lower time limit for the range for the
range-qualified delay pattern trigger
TRIGger:DELay:PATtern:RANge:
WHEN
Select the triggering criteria for the range-qual-
ified delay pattern trigger: In Range or Out of
Range
TRIGger:DELay:PULse? Return pulse trigger parameters