Filter
Top Products
Command Syntax
TLS 216 Programmer Manual
2–7
Commands can specify which measurement to set or query as a mnemonic in the
header. Up to four automated measurements may be displayed with each
displayed waveform. The displayed measurements are specified in this way:
Symbol Meaning
MEAS<x> A measurement specifier; <x> is either 1 [top], 2, 3, or 4[bottom].
Commands can specify the channel to use as a mnemonic in the header.
Symbol Meaning
CH<x> A channel specifier; <x> is either 1, 2, 3, or 4.
CH<x> A channel specifier; <x> is one of 1 through 16.
Commands can specify the group to use as a mnemonic in the header.
Symbol Meaning
GRP<x> A group specifier; <x> is one of 1 through 8.
Commands can specify the reference waveform to use as a mnemonic in the
header.
Symbol Meaning
REF<x> A reference waveform specifier; <x> is either 1, 2, 3, or 4.
In some commands, you can specify a waveform regardless of whether it is part
of a group or not (for instance, when specifying a trigger source). Specify such a
waveform as follows:
Symbol Meaning
<wfm> Can be CH<x>
Measurement Specifier
Mnemonics
Channel Mnemonics
Group Mnemonics
Reference Waveform
Mnemonics
Waveform Mnemonics