Filter
Top Products
Command Descriptions
2–292
TLS 216 Programmer Manual
TRIGGER:MAIN:PULSE:SOURCE CH2
selects Channel 2 as the source for the main pulse trigger.
TRIGGER:MAIN:PULSE:SOURCE?
might return AUXILIARY, indicating that the rear panel connector labeled
AUX TRIGGER INPUT is the main pulse trigger source.
TRIGger:MAIn:PULse:WIDth? (Query Only)
Returns the width parameters for the main pulse width trigger.
Trigger
TRIGger:MAIn:PULse:WIDth?
TRIGger :
:
PULse
MAIn
WIDth ?:
TRIGGER:MAIN:PULSE:WIDTH?
might return :TRIGGER:MAIN:PULSE:WIDTH:LOWLIMIT 2.0E-9;HIGHLIMIT
2.0E-9;WHEN WITHIN;POLARITY POSITIVE as the current main pulse
trigger parameters.
TRIGger:MAIn:PULse:WIDth:HIGHLimit
Sets or queries the upper limit for the main pulse width trigger. Using this
command is equivalent to setting the Upper Limit in the Pulse Width Trigger
When side menu.
Trigger
TRIGger:MAIn:PULse:WIDth:HIGHLimit <NR3>
TRIGger:MAIn:PULse:WIDth:HIGHLimit?
Examples
Group
Syntax
Examples
Group
Syntax