Filter
Top Products
Command Descriptions
2–338
TLS 216 Programmer Manual
GROUP works on the selected channel value.
<QString> is "V" for volts or "VV" for volts
2
, and specifies the vertical units.
WFMPRE:GROUP3:YUNIT V"
sets the vertical units of group 3 to volts.
WFMPRE:CH2:YUNIT?
might return "V", indicating the units for the vertical component of the
channel 2 waveform data are volts.
WFMPre:<wfm>:YZEro
Sets or queries the vertical (Y-axis) offset voltage. On input <wfm> always
defaults to the reference location specified by DATa:DESTination regardless of
what is sent.
Waveform
WFMPre:<wfm>:YZEro <NR3>
WFMPre:<wfm>:YZEro?
?
<Space> <NR3>
WFMPre :
<wfm>
:
YZEro
<wfm> = CH<x>
REF<y>
GROUP<z>
REF<y>CH<x>
GROUP works on the selected channel value.
<NR3> is the vertical offset in YUNits (usually volts).
WFMPRE:GROUP3:YZERO 2.0
sets the vertical offset of group 3 to 2 .0 volts.
WFMPRE:CH10:YZERO?
might return 1.0E+0, indicating the vertical offset of channel 10 is 1.0 volts.
Arguments
Examples
Group
Syntax
Mnemonics
Arguments
Examples