Filter
Top Products
Command Descriptions
2–230
TLS 216 Programmer Manual
PULSE:WIDTH:LOWLIMIT 2.0E-9;HIGHLIMIT 2.0E-9;WHEN WITHIN;
POLARITY POSITIVE;:TRIGGER:DEL.
TRIGger:DELay
Sets the delayed trigger level to 50% of the trigger signal or queries the current
delayed trigger parameters.
Trigger
TRIGger:DELay SETLevel
TRIGger:DELay?
TRIGger :
DELay
SETLevel
?
<Space>
SETLevel sets the delayed trigger level to half way between the minimum and
maximum amplitudes of the trigger source input. Using this argument is
equivalent to pressing the front panel Set Level to 50% button.
TRIGGER:DELAY SETLEVEL
sets the delayed trigger level to 50% of the minimum and maximum values.
TRIGGER:DELAY?
might return :TRIGGER:DELAY:TYPE EDGE;BY RUNSAFTER;EDGE:SOURCE
CH1;SLOPE RISE;:TRIGGER:DELAY:PULSE:CLASS GLITCH;SOURCE
CH1;GLITCH:WIDTH 2.0E-9;WHEN LESSTHAN;POLARITY POSITIVE;
:TRIGGER:DELAY:PULSE:WIDTH:LOWLIMIT 2.0E-9;HIGHLIMIT 2.0E-9;
WHEN WITHIN;POLARITY POSITIVE;:TRIGGER:DELAY:PATTERN:QUALIFIĆ
ER LIMIT;LIMIT:WHEN MORETHAN;WIDTH 2.0E-9;:TRIGGER:DELAY:
PATTERN:RANGE:WHEN INSIDE;HIGHLIMIT 2.0E-9;LOWLIMIT 2.0E-9;
:TRIGGER:DELAY:PATTERN:INPUT 65537,1;LOGIC AND;:TRIGGER:
DELAY:STATE:INPUT 65537,1;LOGIC AND;CLOCK CH1;SLOPE RISE;
:TRIGGER:DELAY:SEQUENCE:QUALIFIER LIMIT;LIMIT:WHEN MORETHAN;
WIDTH 2.0E-9;:TRIGGER:DELAY:SEQUENCE:RANGE:WHEN INSIDE;HIGHĆ
LIMIT 2.0E-9;LOWLIMIT 2.0E-9;:TRIGGER:DELAY:SEQUENCE:START:
LOGIC AND;INPUT 65537,1;:TRIGGER:DELAY:SEQUENCE:END:LOGIC
AND;INPUT 65537,2;:TRIGGER:DELAY:TIME 16.0E-9;EVENTS:COUNT.
Group
Syntax
Arguments
Examples