Filter
Top Products
Getting Started
TLS 216 Programmer Manual
1–5
Figure 1–6: Selecting the GPIB Address in the GPIB Configuration Side Menu
4. Press the Configure button in the main menu to display the GPIB Configura-
tion side menu. (See Figure 1–6.)
Other Communication Setups
The procedure just listed configures the logic scope for bidirectional communica-
tion with your controller. In certain situations you may want to disable commu-
nications or send hard copies directly to a non-488.2 hard copy device.
H To isolate the logic scope from the bus, press the Off Bus side menu button.
This setting disables all communication with the controller.
H To enter a special mode of operation to communicate directly with non-488.2
hard copy devices, press the Hardcopy side menu button.
This setting places the logic scope in Talk Only mode and directs it to send
hard copy information when you press the HARDCOPY button only (and to
accept a HARDCOPY ABORT command).