Filter
Top Products
Command Descriptions
2–132
TLS 216 Programmer Manual
GROUP<x>:POSition?
POSition
GROUP
<x>
:
?
<Space> <NR3>
<NR3> is the desired position in divisions from the center graticule. The range is
±5 divisions.
GROUP2:POSITION 1.3E+0
positions the group 2 input signal 1.3 divisions above the center of the
display.
GROUP1:POSITION?
might return -1.3E+0, indicating that the current position of group 1 is at
–1.3 divisions.
GROUP<x>:SCAle
Sets or queries the vertical gain of the specified group. Using this command is
equivalent to adjusting the front panel Vertical SCALE knob. The setting for
group scale determines the vertical height of any waveform group displayed in
Analog display mode. It also scales a waveform group before its processed for
display in BusForm and Timing Diagram display modes; however, the group
scale setting does not determine the height of BusForm and Timing Diagram
waveforms on screen. See the command description for GROUP<x>:HEIght on
page 2–129 of this section.
Vertical
GROUP1:VOLts
GROUP<x>:SCAle <NR3>
GROUP<x>:SCAle?
GROUP
<x> :
SCAle
?
<Space>
<NR3>
<NR3> is the gain in volts per division. The range is 50 mV/div to 2 V/div.
Arguments
Examples
Group
Related Commands
Syntax
Arguments