Filter
Top Products
Command Descriptions
2–264
TLS 216 Programmer Manual
HIGH specifies that the selected channel must be High relative to the threshold
level.
LOW specifies that the selected channel must be Low relative to the threshold
level.
X specifies that the selected channel can be either High or Low relative to the
threshold level.
TRIGGER:DELAY:SEQUENCE:START:CH14 HIGH
specifies that channel 14 must be High to meet the Boolean requirements of
the defined start pattern for the delayed sequence trigger.
TRIGGER:DELAY:SEQUENCE:START:CH11
might return LOW, indicating the delayed sequence trigger logic levels for
channel 11.
TRIGger:DELay:SEQuence:STARt:INPut
Sets or queries the logic pattern input values for all 16 channels and the
Auxiliary Trigger input.
Trigger
TRIGger:DELay:SEQuence:STARt:INPut <NR1>,<NR1> NOTE: 1-high,0-low
TRIGger:DELay:SEQuence:STARt:INPut?
TRIGger
:
DELay
SEQuence
:
:
STARt
<NR1> , <NR1>
INPut
?
<Space>
:
<NR1> is a value from 0 to 131071. The logic pattern input values of all channels
and the Auxiliary Trigger input are set according to this value. The parameter is
interpreted as a 17-bit binary number. Bits 1 through 16 are used to set the High
or Low values of channels 1 through 16. Bit 17 is used to set the High or Low
value of the Auxiliary Trigger input. A bit value of 1 for a channel indicates
High, a bit value of zero indicates a Low. NOTE: Bit values are ignored if the
matching bit in the second parameter is zero.
<NR1> is a value from 0 to 131071. The “Don’t Care” values of all channels and
the Auxiliary Input are set according to this value. The parameter is interpreted
Arguments
Examples
Group
Syntax
Arguments