Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–145
HORIZONTAL:DELAY:MODE RUNSAFTER sets the delayed time base to runs after
delay mode
HORIZONTAL:DELAY:MODE?
might return TRIGAFTER, which indicates the delayed time base is set to
trigger on the first valid trigger occurring after the delay time elapses (delay
time is from the main trigger event).
HORizontal:DELay:SCAle
Sets the time per division for the delayed time base. Using this command is
equivalent to setting Delayed Scale in the Horizontal Scale side menu.
Horizontal
HORizontal:DELay:SECdiv
HORizontal:DELay:SCAle <NR3>
HORizontal:DELay:SCAle?
:
SCAle
:
DELay
HORizontal
?
<Space> <NR3>
<NR3> is the time per division. The range is 5 s to 500 ps in a 1-2.5-5 sequence.
Values not set in the specified sequence will be adjusted to the closest valid
value. If the delayed time base scale is set slower than the main time base scale,
both the main and delayed time base scales will be set to the delay scale value.
HORIZONTAL:DELAY:SCALE 2.0E-6
sets the delay scale to 2 ms per division.
HORIZONTAL:DELAY:SCALE 9.0E-6
sets the delay scale to 10 ms per division. Since 9 ms is not a valid value
within the 1-2.5-5 sequence, it is automatically set to the closest valid value.
HORIZONTAL:DELAY:SCALE?
might return 1.0E-3, indicating that the delay time is 1 ms per division.
Examples
Group
Related Commands
Syntax
Arguments
Examples