Filter
Top Products
Command Descriptions
2–168
TLS 216 Programmer Manual
IMMed
:
:
MEASUrement
SOURCE
1
<Space>
?
CH
GROUP
REF
REF
<x>
<y>
<z>
<z> CH <x>
CH<x> specifies that channel <x> be the waveform source for the immediate
measurement.
GROUP<y> specifies that the channel currently selected in group <y> be the
waveform source for the immediate measurement. The command GROUP<x>:SEĆ
LECT, described on page 2–133, sets the selected channel.
REF<z> specifies that the currently selected channel in reference group <z> be
the waveform source for the immediate measurement. The command
REF<x>:SELECT, described on page 2–212, sets the selected channel.
REF<z>CH<x> specifies that channel <x> in reference group <z> to be used as the
waveform source for the immediate measurement.
MEASUREMENT:IMMED:SOURCE CH1
specifies channel 1 as the immediate measurement source.
MEASUREMENT:IMMED:SOURCE1?
might return REF1CH1, indicating the first channel of the first reference group
is the clock source.
MEASUrement:IMMed:SOURCE2
Specifies the source to measure “to” when taking an Immediate Delay or Phase
measurement.
Measurement
MEASUrement:IMMed:SOURCE2 { CH<x> | GROUP<y> | REF<z> |
REF<z>CH<x> }
MEASUrement:IMMed:SOURCE2?
Arguments
Examples
Group
Syntax