Filter
Top Products
Command Descriptions
2–220
TLS 216 Programmer Manual
*SAV (No Query Form)
Saves the state of the logic scope to a specified memory location. You can later
use the *RCL command to restore the logic scope to this saved state. Using this
command is equivalent to selecting the Save Current Setup in the Save/Recall
Setup menu.
Save and Recall
DELEte:SETUp, FACtory, *RCL, RECAll:SETUp, SAVe:SETUp
*SAV <NR1>
<NR1>
*SAV
<Space>
<NR1> is a value in the range from 1 to 10 and specifies a location. Using an
out-of-range value causes an execution error. Any settings that have been stored
previously at this location will be overwritten.
*SAV 2
saves the current settings in memory location 2.
SAVe:GROUP (No Query Form)
Stores a group or reference group in one of four reference memory locations or a
mass storage file. This command is equivalent to selecting either the Save
GROUP or the Save to File Waveform item in the Save/Recall Group
menu.
Save and Recall
DELEte:GROUP
SAVe:GROUP { GROUP<x> | REF<x> },{ REF<y> | <file path> }
SAVe :
GROUP
<Space>
GROUP<x>
REF<x>
,
<file path>
REF<y>
Group
Related Commands
Syntax
Arguments
Examples
Group
Related Commands
Syntax