Filter
Top Products
Command Descriptions
2–192
TLS 216 Programmer Manual
MEASUREMENT:REFLEVEL:ABSOLUTE:MID?
might return 3.0E+0, indicating the mid reference level value is 3.0 volts.
MEASUrement:REFLevel:ABSolute:MID2
Sets or queries the Mid reference level for the “to” waveform when taking a
Delay measurement. Comprises the 50% reference level when MEASUre-
ment:REFLevel:METHod is set to ABSolute. This command is equivalent to
setting the Reference Levels in the Measure menu.
Measurement
MEASUrement:REFLevel:ABSolute:MID2 <NR3>
MEASUrement:REFLevel:ABSolute:MID2?
MID2
?
<Space> <NR3>
MEASUrement :
REFLevel
:
ABSolute
:
<NR3> is the mid reference level, in volts. The default is 0.0 V.
MEASUREMENT:REFLEVEL:ABSOLUTE:MID2 0.5E+0
sets the Mid2 reference level value for the delay waveform to 0.5 volts.
MEASUREMENT:REFLEVEL:ABSOLUTE:MID2?
might return 3.2E+0, indicating the mid2 reference level value is 3.2 volts.
MEASUrement:REFLevel:METHod
Specifies which reference levels are used for Measurement calculations. This
command is equivalent to setting the levels in the Reference Levels side menu.
Measurement
MEASUrement:REFLevel:METHod { ABSolute | PERCent }
MEASUrement:REFLevel:METHod?
Group
Syntax
Arguments
Examples
Group
Syntax