Filter
Top Products
Command Descriptions
2–174
TLS 216 Programmer Manual
MEASUrement:MEAS<x>? (Query Only)
Returns all measurement parameters for the displayed measurement specified by
MEAS<x>. MEAS<x> is one of the four measurements available (named
Measurement 1 through 4), where <x> specifies 1 through 4.
Measurement
MEASUrement:MEAS<x>?
:MEASUrement
MEAS
<x> ?
MEASUREMENT:MEAS3?
might return :MEASUREMENT:MEAS3:STATE 0;TYPE PERIOD;
UNITS "s";SOURCE1 CH1;SOURCE2 CH2;DELAY:EDGE1 RISE;
EDGE2 RISE;DIRECTION FORWARDS, indicating the type (period) of
measurement and other parameters associated with measurement 3.
MEASUrement:MEAS<x>:CLOCk? (Query Only)
Returns the current setup (source, direction, and so on) for the clock associated
with the measurement specified by MEAS<x>. MEAS<x> is one of the four
measurements available (named Measurement 1 through 4) where <x> specifies
1 through 4. The clock specification only affects setup or hold measurement
types.
Measurement
MEASUrement:MEAS<x>:CLOCk?
MEASUrement :
MEAS
?:
CLOCk
<x>
MEASUREMENT:MEAS<x>:CLOCK?
might return CH16.
Group
Syntax
Examples
Group
Syntax
Examples