Filter
Top Products
Command Descriptions
2–254
TLS 216 Programmer Manual
TRIGger:DELay:SEQuence:END:CH<x>
Sets or queries the logic level expected at the channel input as defined by Ch<x>
(part of the end pattern definition for the delay sequence trigger).
Trigger
TRIGger:DELay:SEQuence:END:CH<x> { HIGH | LOW|X}NOTE: defines
CH<x> pattern bit to High, Low, or Don’t Care.
TRIGger:DELay:SEQuence:END:CH<x>?
LOW
X
TRIGger
:
DELay
SEQuence
:
:
END
<x>CH
:
<Space>
?
HIGH
HIGH specifies that the selected channel must be High relative to the threshold
level.
LOW specifies that the selected channel must be Low relative to the threshold
level.
X specifies that the selected channel can be either High or Low relative to the
threshold level.
TRIGGER:DELAY:PATTERN:CH14 HIGH
specifies that channel 14 must be High to meet the Boolean requirements of
the defined pattern for the delayed trigger.
TRIGGER:DELAY:PATTERN:CH12?
might return X, indicating the specified channel may be either High or Low.
TRIGger:DELay:SEQuence:END:INPut
Sets or queries the logic pattern input values for all 16 channels and the
Auxiliary Trigger input.
Trigger
TRIGger:DELay:SEQuence:END:INPut <NR1>,<NR1> NOTE: 1-high,0-low
Group
Syntax
Arguments
Examples
Group
Syntax