Filter
Top Products
Command Descriptions
TLS 216 Programmer Manual
2–281
TRIGger:MAIn:PATtern:INPut
Sets or queries the logic pattern input values for all 16 channels and the
Auxiliary Trigger input.
Trigger
TRIGger:MAIn:PATtern:INPut <NR1>,<NR1>
NOTE: 1 High, 0 low
TRIGger:MAIn:PATtern:INPut?
TRIGger
:
MAIn
PATtern
:
:
<NR1> , <NR1>
INPut
?
<Space>
<NR1> is a value from 0 to 131071. The logic pattern input values of all channels
and the Auxiliary Trigger input are set according to this value. The parameter is
interpreted as a 17-bit binary number. Bits 1 through 16 are used to set the High
or Low values of channels 1 through 16. Bit 17 is used to set the High or Low
value of the Auxiliary Trigger input. A bit value of 1 for a channel indicates
High, a bit value of zero indicates a Low. NOTE: Bit values are ignored if the
matching bit in the second parameter is zero.
<NR1> is a value from 0 to 131071. The “Don’t Care” values of all channels and
the Auxiliary Input are set according to this value. The parameter is interpreted
as a 17-bit binary number. Bits 1 through 16 are used to set the “Don’t Care”
status of channels 1 through 16. Bit 17 sets the “Don’t Care” of the Auxiliary
Input. A bit value of zero will set the Boolean value to “Don’t Care” for that
channel, regardless of the first parameter bit value. A bit value of 1 for a channel
indicates the high or low value set by the previous parameter is used.
TRIGGER:MAIN:PATTERN:INPUT 65535, 65535
sets all 16 channels to trigger on High input values and sets the Auxiliary
Input to “Don’t Care”.
TRIGGER:MAIN:PATTERN:INPUT 1, 1
sets channel 1 High and all other inputs to to “Don’t Care”.
TRIGGER:MAIN:PATTERN:INPUT?
might return 3,3 indicating channels 1 and 2 will trigger when their input
values are High. The other channels and the Auxiliary bits are set to “Don’t
Care”.
Group
Syntax
Arguments
Examples