Filter
Top Products
Baseball Operations 63
Setting Result
0-DISABLED
SWITCH OUTPUT=n
0-DISABLED?
n = current setting
The switch remains open at all times and any external
devices are disabled.
1-CLOCK = 0
SWITCH OUTPUT=n
1-CLOCK =0?
n = current setting
In count down mode, the switch closes when the main
clock reaches zero and remains closed until a
nonzero value is entered.
In count up mode, the switch closes when the main
clock reaches the proper period, break, or overtime
length and opens when any other value is entered.
2-CLOCK STOP
SWITCH OUTPUT=n
2-CLOCK STOP?
n = current setting
The switch closes when the main clock is stopped
and opens when the main clock is running. External
devices are disabled when the main clock is running.
3-MAIN HORN
SWITCH OUTPUT=n
3-MAIN HORN?
n = current setting
The switch closes when the main horn sounds. This
could be when Auto Horn is enabled and the main
clock reaches zero or when <HORN> is pressed.
Default Settings
Write the settings for this installation in the space (Custom) provided.
Setting Default Custom 1 Custom 2 Custom 3
Period Length 00:00
Error Position On
Auto Increment
Pitches
No
Auto Increment
Inning
No
Score by Inning No
Inning Sequence Blank
Display Inning 10
Switch Output 1-Clock = 0